mild steel

noun

1. 软钢；低碳钢
   a type of steel containing very little carbon which is very strong but not easy to shape

1. Make a Mobius strip out of a ribbon of mild steel and magnetise it.
   用一根软钢条做成麦比乌斯带，将其磁化。
2. Ferrite and carbon constitute the mild steel.
   铁素体和碳组成低碳钢。
3. Nickel-plated mild steel round head wood screw
   镀镍低碳钢圆头木螺丝
4. Inhibition Effect of Propiolic alcohol on Mild Steel in Mud Acid
   土酸溶液中丙炔醇对碳钢的缓蚀作用
5. Resistance diffusing soldering of copper and mild steel Static contact Electrode shape Inserting solder Potential difference;
   铜与低碳钢电阻扩散焊；静触头；电极形状；嵌料；电位差；
6. Weight-loss method and polarization curve measurement were employed to study the inhibition mechanism of imidazoline derivate for mild steel in acidic solution with H2S.
   使用失重法和电化学极化技术研究了咪唑啉衍生物在H2S水溶液中对碳钢腐蚀的抑制机理。
7. Combination ring sensors for corrosion monitoring on mild steel and copper specimens.
   组合环式传感器用于软钢和铜式样的腐蚀性监测。
8. Mild steel has a high tensile strength, this being about 200 times that of concrete.
   软钢的抗张强度大，约为混凝土的200倍。
9. At the same time, because of the nature of its corrosion products, zinc normally corrodes much more slowly than mild steel.
   同时，由于锌腐蚀生成物的特性，锌的腐蚀速度通常大大低于软钢。
10. Technology of friction stir welding for copper and mild steel thick plate
    紫铜与低碳钢厚板搅拌摩擦焊工艺分析
11. DN3 series spot welder is widely utilized in the spot welding of mild steel, corrosion resistant plate and round wire in the industries such as panel beating, light fittings and hardware appliances.
    系列点焊机同样广泛应用于钣金，灯具，五金电器行业中低碳钢、不锈钢板和圆丝的点焊。
12. Corrosion is an electro-chemical process by which a metal such as mild steel, returns to its natural state, state, such as iron oxide or rust.
    腐蚀是一种电化的过程，像低碳钢一类的金属，因腐蚀而回复到自然状态，如氧化铁，即铁锈。
13. Study on passive energy dissipation performance of steel frame with mild steel damper
    设置软钢阻尼器的钢框架消能减震性能研究
14. Casing can be constructed of mild steel, aluminum or stainless steel materials.
    壳体可采用低碳钢、铝或不锈钢材料制作。
15. Effects of pH Value and Dissolved Oxygen on Pit Initiation Behavior of Mild Steel
    pH值和溶解氧对低碳钢点蚀诱发的影响
16. Recommended for cutting aluminum pipe, bronze pipe, brass pipe, copper pipe, galvanized pipe, mild steel and tougher steels including stainless pipe, plus other problem material at slow speed.
    推荐用于切割铝管，青铜管，铜管，镀锌管，软钢管和硬钢管，包括不锈钢管，还有其它的材料以缓慢地速度切割。
17. Mechanical properties of brazing joint of alumina ceramics to mild steel
    氧化铝陶瓷与低碳钢钎焊接头的力学性能
18. Mild steel is usually used for general engineering purposes.
    软钢通常用在一般工程上。
19. Seismic reduction effect on high-rise steel structure by mild steel damper
    软钢阻尼器对高层钢结构的减震作用
20. Mild steel plate flanges, cast stainless steel flanges, wafer-type butterfly valve, 2-piece flange-type ball valve, steel plate.
    软钢板法兰，不锈钢铸板法兰，片型蝶阀，2片式法兰型球阀，钢板。
21. The carbon content of mild steel is much lower than cast-steel.
    软钢的含碳量要比铸钢的低得多。
22. The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
    分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素对仿真结果的影响。
23. The mild steel core provides strength and ductility, the surface cladding providing other service characteristics, usually corrosion resistance.
    利用低碳钢的强度和韧性，利用镀层金属的其他特性，尤其是耐腐蚀性。
24. Form most types of sheet metal materials Mild Steel, Stainless Steel, Aluminum, Titanium, Perforated Metal Mesh.
    可成形材料包括碳钢，不锈钢，铝，钛板及金属网。
25. The electrochemical method and atomic force microscope ( AFM) were applied to study the inhibition mechanism of Im-D, an imidazoline derivate inhibitor, for mild steel in CO2 saturated solution.
    应用电化学弱极化法和原子力显微镜（AFM）研究了咪唑啉衍生物类缓蚀剂在模拟深层气井水溶液中对碳钢的二氧化碳腐蚀的抑制效果和缓蚀作用机理。
26. Bright mild steel hexagonal pressed nut Perfect hexagon is the most compact grouping of wires.
    光亮软钢六角冲压螺丝帽精确的六角形是最密实的钢丝束。
27. Acoustic Emission Analysis and Pattern Recognition on Hydrogen Induced Cracking of Mild Steel
    低碳钢氢致开裂声发射信号分析与模式识别
28. Using the step traveling welding and making use of the computer, the penetration control in TIG welding on mild steel has been studied.
    采用步进式TIG焊，利用计算机控制，对薄板低碳钢平板堆焊的熔透控制进行了研究。
29. Pressure Seal? uncomplicated design has segmented retaining ring and mild steel silver plated gasket to aid disassembly and provide maximum bonnet seal.
    压力密封？结构简单，分段扣环，镀银低碳钢垫圈，有助于拆卸和最大限度的阀帽密封。

noun

1. steel with less than 0.15% carbon

   Synonym:    low-carbon steelsoft-cast steel